Basic Feather Cane

Supplies
  • 3 ounces Color A (Premo Purple)
  • 3 ounces Color B (Premo Turquoise mixed with equal amount of Premo white)
  • 1 ounce Color C (sheet) >I used a ratio of 3 parts purple to 1 part black...
  • 1 ounce Color D (Premo Fuchsia mixed with 2 parts of Premo White)
  • Pasta Machine or something to roll with
  • Tissue blade or something to slice with
  • Brayer (optional) to flatten with
  • Clean work surface

Set up your colors for a Skinner blend and blend them together. To learn how to do a Skinner blend, go HERE.  I wanted equal size bands of the two edge colors and the central blend color, so I set up the color overlap to be narrow, and not extend to the corners of the clay sheet.

Starting at the "foot" of your finished blend, roll it up into a log, with the dark color on one end (left side in this picture) and the light color on the other end (right side of picture).

Take care when rolling it up to avoid trapping air bubbles in it.

Place your hands at each end of the log and roll it back and forth, pressing your hands so they move in toward the middle. This will end up shortening your log and making it into a short, fat plug.  It takes some time to do this without having the cane fold over on itself, so be patient and work at it slowly.

Press down on the shortened cane (now affectionately called a ' plug') with either your hands or your brayer  to flatten it into a thick cube shape, and then square up the sides.

Turn the plug so the dark portion is along the top; then grip the left and right sides and pull them away from each other to stretch the plug out, making the dark side and the light side longer. Or, you can use a brayer or a jar to roll back and forth across the surface. Either way, you want to make the squashed/cubed plug into a long rectangle. Take care you keep the shape of the rectangle and to have the dark color on one long edge of the rectangle and the light color on the other long edge of the rectangle.  

The finished rectangle should be about 2 inches wide and about 1/2 inch thick.

Now, using the Color C clay (i.e. black mixed with a color), create a long narrow sheet of clay  and place this on top of the long rectangle log.  I used  the widest setting on my pasta machine to create this sheet of clay.

Pinch (squish) one end of the rectangle cane down to a point using your hands or your brayer, and...

...put the pinched (squished) end of the rectangle log into your pasta machine. Make sure your pasta machine is placed on the widest setting.

Carefully roll the cane through the machine. If you are rolling this manually, you have a ways to go!!  I roll the cane through manually (even though I have a motor) because I can maintain more control of the long sheet as it emerges from the pasta machine.

This will make a very long sheet approximately  50 inches long and 1/8 inch thick.  It helps me a lot to use a long table when I create this very long sheet.
Click Picture for a Larger View

Cut the very long sheet into pieces about every 2 inches and set the sections aside. Do not stack them yet.

Place one piece flat on your work surface.  In this picture, you see the dark (left) to light (right) skinner blend underneath the Color C (darker) sheet.

Put second 2 inch piece next to the first with the dark EDGE on your work surface next to the dark end of the first piece. This will give you an "L" shape. Butt the base of the piece standing on end up against the piece flat on the work surface...
Click Picture for a Larger View

...then, leaving the edge touching your work surface, fold the second piece over on top of the first piece.  It helps to have three hands here - the third to keep the second piece from lifting up off the work surface, but most of us only have two...  :)

Continue stacking the pieces in this fashion until all but one piece are together. (Reserve this last piece for now)  Sometimes it's interesting to reverse the dark to light Skinner blend on one or more pieces as you build the feather.  In this example, I reversed the Skinner blend on the 4th, 7th, and 11th sheets, by putting the light edge of the piece on the work surface instead of the dark edge.
Click Picture for a Larger View
 


While you're stacking the pieces, you might want to add spots (bull's eye canes) or dots (snakes of one solid color) between the pieces as you create the feather.

Now gently lift this piece of the feather cane off your work surface and turn it on its side.


With the stack of pieces standing on its side you now see the beginnings of half a feather. Take the 2" piece you set aside earlier and place it so it lays "under" the pieces that were stacked on end.
Click Picture for a Larger View

You may optionally like to add a thin sheet of the color used for your spots/dots on top of the reserved piece. In this cane, I placed a narrow, thin sheet of the Fuchsia/White blend across the center of the reserved piece.
Click Picture for a Larger View

Reduce this half-feather cane by pulling the ends away from one another, carefully stretching it. Take care to keep the thickness of the cane even. You can place one end on the table with your hand on it to anchor it and pull while gently shaking the cane with the other hand (a little like skipping a rope). This uses the weight of the cane to do half your work for you and gives you a more even stretch. Swap ends and continue. If you find this step too hard, go through the next three steps and reduce after the two sides are matched up.

Cut the stretched cane in half, then pick up the two ends in the middle where you cut, leaving the cane spread out on the surface (like it's doing the splits). Place the two ends together, carefully lining up the design so you get a perfect mirror image.

Now flip the cane over and place the matched cut ends on the work surface so you get a "banana peel" effect. Gently, firmly and carefully close the two feather halves together working from the your work surface up to the end. Take care, as you close the sides, to avoid trapping any air, and try to make the bands of color match up as closely as possible.
MVC-054F.JPG (46504 bytes)
Stretch (reduce) as desired, and slice... and enjoy!
Click Picture for a Larger View
tweakeda.jpg (8386 bytes) jean002a.jpg (5562 bytes)
These are examples of what you can do if you cut up the feather cane and reassemble it!
Click Pictures for a Larger View.
Feather cane by beta tester, Kellie Robinson   
Feather Cane made by Kellie Robinson

sgfeatheregg1a.jpg (4276 bytes) kellieinroa.jpg (3749 bytes)
This are two more examples, given by Kellie Robinson, of what you can do with your cane.
Click Pictures for a Larger View
Feathercane by beta tester Tonja Lenderman
Feather Cane made by Tonja Lenderman
sunnibergeron.jpg (2854 bytes)
Feather Cane by Sunni Bergeron

featherpensa.jpg (4748 bytes)
Series of pens made by Sunni Bergeron.
Click Picture for a Larger View